|
 Ansoft Designer / Ansys Designer 在线帮助文档：
Generating Reports and Postprocessing >
Creating Reports >
Display Types
Display Types
The information in a report can be displayed in several
formats. When you left click Product > Results
(or right-click Results in
the Project tree) and point to a desired report type,
you can then choose from one of the following display types:
![[spacer]](1p.gif)
Rectangular Plot
|
A 2D rectangular (x-y) graph.
|
Polar Plot
|
A 2D circular chart divided by
spherical coordinates.
|
Data Table
|
A grid with rows and columns that
displays, in numeric form, selected quantities against a swept variable
or another quantity.
|
Smith Chart
|
A 2D polar chart of S-parameters
upon which a normalized impedance grid has been superimposed.
|
Rectangular Stacked Plot
|
A 2D rectangular (x-y) stacked
graph.
|
3D Rectangular Plot
|
A 3D rectangular (x-y-z) graph.
|
3D Polar Plot
|
A 3D circular plot divided by spherical
coordinates.
|
Rectangular Contour Plot
|
A 2D rectangular contour chart
of the load-pull results.
|
Smith Contour Plot
|
A 2D Smith contour chart of the
load-pull results.
|
Statistical Eye Plot
|
A 2D rectangular-eye diagram that
does not retain the transient data for further postprocessing
|
Note
|
Depending on
the nature of your installation and the projects loaded into Designer,
at times only a subset of the types listed above may appear in the display-types
submenu.
|
The topics for this section include:
Rectangular Plot
Polar
Plot
Data
Table
Smith
Chart
Rectangular Stacked Plot
3D Rectangular Plot
3D
Polar Plot
Rectangular Contour Plot
Smith Contour Plot
Statistical Eye Plot
Plot-On-Schematic
Reports With Differential Pairs
Creating a Report from a File
Note
|
Depending on
the nature of your installation and the projects loaded into Designer,
at times only a subset of the types listed above may appear in the display-types
submenu.
|
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 