淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
   Creating Reports >
       Display Types >
           Creating a Report from a File

Creating a Report from a File

A report can be saved from one design and imported into another (or imported into the same design later). This allows you to take a static snapshot of a set of simulation data and view it at a later stage of the design process, or view the same data set in one or more different designs.

To save a report to an Ansoft Report Data File:

1. Create the report that you wish to save.

2. Right click in the report window and select Export to open the Export Report dialog.

3. Select the Ansoft ReportData files option (.rdat) in the Save as type selection window.

4. Use the Export Report dialog to navigate to a desired location and either create a file name or select an existing file for the exported report and then click Save.

To create a report from an existing Ansoft Report Data File:

1. Right click on the Results folder in the Designer project tree and select Create Report From File.

2. Browse to select the desired Ansoft ReportData file (.rdat) and then click Open.

3. The selected report is created in a new report window.

Notes:

• Most report types supported by Designer (including Rectangular Plots, Smith Charts, and Eye Diagrams) can be exported to Ansoft ReportData files. However, three-dimensional plots can not be exported or imported.

• Limited editing of reports created from files is supported. For example, you can change the color of a trace or an eye mask definition.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com