淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
   Creating Reports >
       Display Types >
           3D Polar Plot

3D Polar Plot

A 3D polar plot is a 3D circular chart divided by the spherical coordinates R, theta, and phi, where R is the radius, or distance from the origin, theta is the angle from the x-axis, and phi is the angle from the origin in the z direction. Following is the general procedure for drawing a 3D polar plot of results:

1. Left click Product > Results (or right-click Results in the Project tree) and point to a desired report type and then select 3D Polar Plot from the submenu that appears. The New Report dialog appears.

The Report dialog appears.

2. In the Context section make selections from the following field or fields, depending on the design and solution type.

a. Solution field with a drop down selection list.

b. Show field with a drop down selection list. Whether this field appears depends on if differential pairs exist and are enabled.

3. In the Trace tab Mag area, specify the information to plot along the R-axis, or the axis measuring magnitude:

a. On the Category drop down list, click the type of information to plot.

b. On the Quantity list, click the values to plot. Use CTRL-click to make multiple selections.

c. In the Function list, click the mathematical function to apply to the quantity for the plot.

d. The Value field displays the currently specified Quantity and Function. You can edit this field directly. Note that invalid expressions are displayed in red.

e. Range Function button — opens the Set Range Function dialog. This applies currently specified Quantity and Function.

4. On the Trace tab Theta (Secondary Sweep) line, select the sweep variable from the drop down list and specify all values or select values to plot along the theta-axis:

5. On the Trace tab Phi (Primary Sweep) line, select the sweep variable from the drop down list, and specify all values or select values to plot along the phi-axis:

6. Click New Report.

This creates a new report in Project tree, displays the report with the defined trace, and enables the Add Trace button on the Report dialog.

The function of the selected quantity or quantities will be plotted against the R-, phi-, and theta-axes on a 3D polar graph. The plot is listed under Results in the project tree. When you select the traces or plots, their properties are displayed in the Properties window. These properties can be edited directly to modify the plot.

7. Optionally, add another trace to the plot by following the procedure above, using Add Trace rather than New Report.


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com

3D Polar Plot

Related Topics