淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
   Creating Reports >
       Display Types >
           Data Table

Data Table

A data table is a grid with rows and columns that displays, in numeric form, selected quantities against a swept variable or other quantities.

1. Left click Product > Results (or right-click Results in the Project tree) and point to a desired report type and then select Data Table from the submenu that appears. The New Report dialog appears.

2. In the Context section make selections from the following field or fields, depending on the design and solution type.

a. Solution field with a drop down selection list.

b. Domain field with a drop down selection list. Whether this field appears, and the domains listed, depend on the Solution type and the report type and display type selected.

c. Show field with a drop down selection list. Whether this field appears depends on if differential pairs exist and are enabled.

3. Under the Trace tab Y component section, select the quantity you are interested in and its associated function:

a. On the Category drop down list, click the type of information to plot.

b. On the Quantity list, click the values to plot. Use CTRL-click to make multiple selections.

c. In the Function list, click the mathematical function to apply to the quantity for the plot.

d. The Value field displays the currently specified Quantity and Function. You can edit this field directly. Note that invalid expressions are displayed in red.

e. Range Function button — opens the Set Range Function dialog. This applies currently specified Quantity and Function.

4. In the X (Primary Sweep) section, make selections for the following:

a. Select the Primary value(s) from the drop down menu.
To select an X component that is different than the Primary Sweep, uncheck the Default field to enable the X field and brouse [...] button. Click the brouse [...] button to display the Select X Component dialog. This lets you specify the X component as you do the Y; that is, in terms of Catagories which define the selectable Quantities, and Functions to apply. After making selections, OK the dialog to assign the X component.

b. If sweeps are available, you can select the browse [...] button to display a dialog that lets you select particular sweep or sweeps, or all sweeps.

c. The Families tab provides a way to select from valid solutions for sweeps where a simulation has multiple variables defined (for example, for a parametric sweep). If so, the variables other than the one chosen as the X (Primary sweep), are listed under the Families tab with columns for the variable, the value, and an Edit column with an ellipsis [...] button.

5. Click New Report.

This creates a new report in Project tree, displays the report with the defined trace, and enables the Add Trace button on the Report dialog.

The Y quantity will be listed at each variable value or additional quantity value you specified. The data table is listed under Results in the project tree. The plot is listed under Results in the project tree and the traces are listed under the plot. When you select the traces or plots, their properties are displayed in the Properties window. These properties can be edited directly to modify the plot.

6. Optionally, add another trace to the plot by following the procedure above, using Add Trace rather than New Report.


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com

Data Table

Related Topics