HFSS视频教程推荐： HFSS培训教程套装  |  两周学会HFSS  |  HFSS微波器件仿真分析实例  |  HFSS雷达散射截面分析  HFSS天线设计  |  PCB天线设计和HFSS仿真分析实例  | HFSS-IE仿真器使用详解和天线设计实例

 HFSS online help > Post Processing and Generating Reports >
   Viewing Solution Data       

Viewing Convergence Data

To view an adaptive solution’s convergence information, either during or after the solution process:

1. In the project tree, right-click the solution setup of interest, and then click Convergence on the shortcut menu.

The Solution Data window appears. The Convergence tab is selected.

2. From the Simulation list, select the solution setup for which you want to view convergence data.

By default, the most recently solved solution is selected.

3. Under the Convergence tab, depending on your design setup, you can review the following convergence data:

• Whether the solution is converged or not converged.

• Number of adaptive passes completed and remaining.

• The number of tetrahedra created at each adaptive pass.

• Maximum magnitude of delta S between two passes.

• Maximum delta Energy between two passes.

• Magnitude margin between passes.

• Phase margin (deg) between passes.

• Maximum delta frequency between passes.

If for the Solution Setup, you elected to Use Matrix Convergence, and selected specific table entries for the Magnitude and Phase, the Convergence tab also shows the following values with the Magnitude Margin and Phase Margin:

• Max Delta (Mag S)

• Max Delta (Phase S)

4. Select Table to display the convergence data in table format or Plot to plot the convergence data on a rectangular (X - Y) plot.

Related Topics

Viewing Solution Data for an Optimetrics Design Variation

		Ansys HFSS，Ansoft HFSS online help，Version 15.0.	HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing Convergence Data'>HFSSComments