HFSS视频教程推荐: HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Post Processing and Generating Reports >
Viewing Solution Data >
Viewing Convergence Data
For solutions in which convergence criteria for specific S-matrix entries were specified.
At any time during or after the solution process, you can view the maximum difference of the S Matrix phase between two consecutive passes. The Max Delta (Phase S) is available after two or more passes are completed.
To view the Max Delta (Phase S) between passes:
In the project tree, right-click the solution setup of interest, and then click Convergence on the shortcut menu.
The Solution Data window appears. The Convergence tab is selected.
The Max Delta (Phase S) column lists the Max Delta (Phase S) from one pass to the next.
Setting Matrix Convergence Criteria
Technical Notes: Max Delta (Phase S)
Ansys HFSS,Ansoft HFSS online help,Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing the Max Delta (Phase S)'>HFSSComments |