HFSS视频教程推荐: HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Post Processing and Generating Reports >
Viewing Solution Data >
Viewing Convergence Data
For solutions with ports.
At any time during or after the solution process, you can view the maximum change in the magnitude of the S-parameters between two consecutive passes. This information is available after two or more passes are completed.
To view the maximum magnitude of delta S between passes:
In the project tree, right-click the solution setup of interest, and then click Convergence on the shortcut menu.
The Solution Data window appears. The Convergence tab is selected.
The Max. Mag. Delta S column lists the maximum magnitude of delta S from one pass to the next.
The Max. Mag. Delta S area lists the target change in magnitude of delta S and the change in magnitude of delta S between the last two solved passes.
Note |
Delta S is computed on the appropriate S-parameters - modal or terminal - after the S-parameters have been de-embedded and renormalized. |
Note |
You can renormalize mathematically, without having to re-solve, by accessing the postprocessing tab on the port definition panel and de-selecting the Deembed selection box. |
Setting the Maximum Delta S Per Pass
Technical Notes: Maximum Delta S
Ansys HFSS,Ansoft HFSS online help,Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing the Max Magnitude of Delta S Between Passes'>HFSSComments |