Ansoft Designer / Ansys Designer 在线帮助文档:
Nexxim Simulator > Nexxim Component Models >
Grounded Coplanar Waveguide Elements
Grounded Coplanar Waveguide Elements
This section describes the following grounded coplanar
waveguide distributed elements available in Nexxim.
General Components
Air
Bridge
Air
Bridge, Cross Over
Cross
Step
Tee
Via
Hole
Bends
Unmitered
Bend, Distance between Ground Planes Specified
Unmitered
Bend, Gap Width Specified
Mitered
Bend
Coupled Lines
Coupled
Lines, Asymmetric, Physical Length, Field Solver
Coupled
Lines, Asymmetric, Electrical Length, Field Solver
Couplers
Lange
Coupler, Physical Length
Lange
Coupler, Electrical Length
Inductors
Rectangular
Inductor
Open Stubs
Open
Stub, Physical
Open
Stub, Physical, with Reference
Open
Stub, Electrical
Open
Stub, Electrical, with Reference
Resistors
Thin-Film
Resistor
Shorted Stubs
Shorted
Stub, Physical
Shorted
Stub, Physical, with Reference
Shorted
Stub, Electrical
Shorted
Stub, Electrical, with Reference
Transmission Lines
Tapered
Line
Transmission
Line, Physical Length
Transmission
Line, Physical Length with Reference
Transmission
Line, Electrical Length
Transmission
Line, Electrical Length with Reference
This section also contains information on the Grounded
Coplanar Waveguide substrate type.
Selecting
None for the Initial Substrate
Creating
a Grounded Coplanar Waveguide Substrate
Selecting
a Grounded Coplanar Waveguide Substrate at the Component Level
Grounded
Coplanar Waveguide (GCPW) Substrate
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|