Loft Dialog
Shapes Extrusions Loft
Connect two picked faces. With this function you may create a shape
which connects two selected faces. The new shape’s profile will
morph from the first picked face into the second. Thus you can i.e. connect
a cube with a cylinder more or less smoothly, depending on the smoothness
setting.
After you have created a new shape with loft, the Shape Intersection Dialog box
will open. There you may add the loft shape to one or both of the original
shapes from which you picked the two faces.
Name
Specify the
of the new shape created by the loft action.
Smoothness
Set the smoothness for the loft operation. Note
that loft is a very complex operation which uses splines to describe the
created surfaces. If you do not really need a high smoothness, we recommend
to use a low setting.
Component
Choose a new
from the select list. You can also create a new component by typing the
name of the new component.
Material
Select the material
to which this shape will be assigned from the list of previously defined
materials or create a new material by selecting [New
Material...]. You can also load a material from the material library
by selecting [Load from Material Library...].
OK
Press this button to finally create the shape.
Preview
Press this button to create a preview image
of the new shape. This option is very useful to check the settings before
you actually create the shape.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Brick,
Sphere, Cylinder,
Elliptical cylinder, Cone,
Torus, Extrude
Profile, Extrude Face,
Rotate Profile, Rotate
Face, Shell, Coordinate
systems
![Ansoft Designer 教程](/images/Designer/VNA_AN.png)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|