Extrude Face Dialog
Picks Pick Pick Points, Edges, or Faces: Shapes
Extrusions Extrude
Extrude picked faces. With this function you may create cylindrical,
tapered or twisted shapes with the picked planar faces as profile. You
can extrude cylindrical faces as well.
After you have created a new shape by extrusion, the Shape Intersection Dialog box
will open. There you may add the extruded shape to the original shapes
from which you picked the faces.
If you have picked faces that can not be extruded, or when you have
not picked any face, you will get to the Extrude Profile Dialog box.
Name
Specify the
of the new shape to be created by the extrude action. If multiple faces
are picked, the additional created shapes will have appended indices to
that name.
Height
Height of the new shapes.
Use picks
The last picked point is used for determination
of the height.
Height by 1st face
If multiple faces and a point are picked, you
can choose that all extrudes will have the same height that is calculated
for the first picked face and the point (checked), or whether the height
for each extrude is calculated individually between each face and the
picked point.
Twist
A planar face can be
twisted during the extrusion. Specify the twist angle in degree. Angles
<0 and >360 degree are also possible.
Taper
A planar face can be resized during the extrusion.
You can specify a taper angle from &endash;89 to 89 degree.
Component
Choose a new
from the select list. You can also create a new component by typing the
name of the new component.
Material
Select the material
to which the shapes will be assigned from the list of previously defined
materials or create a new material by selecting [New
Material...]. You can also load a material from the material library
by selecting [Load from Material Library...].
OK
Press this button to finally create the shapes.
Preview
Press this button to create a preview image
of the new shapes. This option is very useful to check the settings before
you actually create the shapes.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Brick,
Sphere, Cylinder,
Elliptical cylinder, Cone,
Torus, Extrude
Profile, Rotate Profile,
Rotate Face, Loft,
Shell, Coordinate
systems .
![Ansoft Designer 教程](/images/Designer/VNA_AN.png)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|