• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
   Ports In Designer >
       Global Ports in Nexxim Designs >
           Selecting a Global Port Name               

Selecting a Global Port Name

In a Nexxim design , a global node created from the Draw pulldown is listed in a .GLOBAL statement in the generated netlist with a default node name G_n, where n is an integer. See Global Nodes in Subcircuits for details. A global port can also be defined in Nexxim by naming a ground port to a node name other than zero (0).

1. On the Schematic Editor toolbar, click the Ground icon.

2. Select the ground symbol. The properties of the ground port appear in the Properties window. (Alternatively, double-click on the symbol to open the Properties dialog box for the ground port.)

3. To change a ground port into a global port, or to rename a global port that has a default node name, double-click on the Value field for the PortName parameter to open the Global Port Name dialog box:

4. Enter the desired name for the global node and click OK.

In a Nexxim design, the named global node is listed in a .GLOBAL statement in the generated netlist. See Global Nodes in Subcircuits for details.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com