 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
|
Schematic Editor > Ports In DesignerThe following types of ports are available in Designer: interface, global, ground and page. • An interface port serves as a connector into or out of a given design, and may contain termination and signal source definitions. The names of interface ports must be unique within a given design but may be duplicated from design to design. • A global port serves as a means of common electrical connection—in effect, a connection to a bus—within a given design, across hierarchical levels. You can define one or more circuit nodes to connet to global ports that cross hierarchy and schematic page boundaries. Within a design, all global ports with the same name are treated as if they are connected together electrically. • A ground port is a special case of a global port. All ground ports connect to the reference or ground node (node 0 in System and Nexxim designs). • A page port serves as a named connection to a signal that is common to two or more pages of the schematic.
Commands to create ports are available from both the Schematic pulldown menu and from toolbar icons:
The topics for this section include: Global Ports in Nexxim Designs
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
|
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com |
|
Ansoft Designer / Ansys Designer 在线帮助文档：
