淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
Ports In Designer >
Interface Ports

Interface Ports

An interface port serves as a named connector, whether the port is currently within a design or not. The interface port parameters specify the port name, its impedance, a reference node, and optionally one or more power/current/voltage source specifications.

To place an interface port, select the schematic that will contain it, then do one of the following:

• On the Draw menu, click Interface Port.

• On the Schematic Draw toolbar, click the Interface Port icon .

The cursor, which is now associated with an interface port symbol for placement, moves to the center of the schematic window. To place the port, click at the desired location. (If Multiple Placement is turned on for interface ports in the Schematic Options dialog box, you can place additional ports by clicking at additional locations.)

To stop placing interface ports, do one of the following:

• Press ENTER, the SPACEBAR, or ESC on your keyboard.

• Right-click, and then select Place and Finish, Finish, or Cancel.

Hint

You can rotate an interface port before placing it by repeatedly pressing R on your keyboard. Each press rotates the port 90º counterclockwise.

Note

To ensure electrical connectivity among schematic elements, the pins of placed interface ports snap to a 100-mil (2.54-millimeter) grid. This snapping cannot be turned off, and the spacing of the connectivity grid cannot be adjusted.

The topics for this section include:

Editing an Interface Port Definition

Port Sources

Setting Up Ports as Differential Pairs

Renaming an Interface Port

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com