淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Schematic Editor >
Ports In Designer >
Global Ports in Nexxim Designs

Global Ports in Nexxim Designs

In Nexxim designs, a global port serves as a named connection to a signal that is common to all parts of the circuit. A global port can represent local power, a special ground node, or any other global signal.

• To place a global port, select the Nexxim schematic that will contain it.

• On the Draw pulldown menu, click Global Port.

The cursor, now carrying a global port symbol for placement, moves to the center of the schematic window. To place the global port, click at the desired location. To end the placement operation, do either of the following:

• Press ENTER, the SPACEBAR, BACKSPACE, or ESC on your keyboard.

• Right-click, and then select Place and Finish, Finish, Cancel, or Back.

Hint

You can rotate the symbol before placing it by repeatedly pressing R on your keyboard. Each press rotates the symbol 90º counterclockwise.

Note

To ensure electrical connectivity among schematic elements, the pins of placed global ports snap to a 100-mil (2.54-millimeter) grid. This snapping cannot be turned off, and the spacing of the connectivity grid cannot be adjusted.

The topics for this section include:

Selecting a Global Port Name

Selecting a Global Port Symbol

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com