淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Drawing Geometric Objects >
       Drawing a Cavity >
           Guidelines for Drawing a Cavity               


Guidelines for Drawing a Cavity

Keep the following things in mind when creating a cavity:

• Cavities can only be defined between two metallized signal layers.

• Cavities cannot be defined between two metallized signal layers when there is an intervening metallized signal layer between them. However, you can create two cavities stacked on top of one another.

• Edge ports must touch the cavity wall. To place sources inside a cavity, use gap sources or probe ports.

• Only gap sources and probe ports can be defined both inside and outside cavities at the same time.

• Cavities and finite ground planes cannot be defined in the same model.



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com