淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Drawing Geometric Objects >
       Drawing a Cavity           


Drawing a Cavity

A cavity in Designer is a box with perfectly conducting walls.

1. Select a signal layer on which the cavity lies.

It must lie between two metallized signal layers.

2. On the Draw menu, click Cavity.

The Cavity Definition dialog box appears.

3. If desired, change the cavity’s name and color.

4. Select a top metallized signal layer from the Top Layer list.

By default, the nearest metallized signal layer above the current signal layer is selected.

5. Select a bottom metallized signal layer from the Bottom Layer list.

By default, the nearest metallized signal layer below the current signal layer is selected.

6. Enter the Width and Height of the cavity.

• Alternatively, click Autosize All to fit the cavity within the geometry of the two metallized signal layers. Or click Autosize Selection to fit the cavity within the geometry of a selected object.

7. Click OK.

The cavity is listed in the project tree under Cavities.

 

Related Topics

Guidelines for Drawing a Cavity



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com