hexahedrel mesher terminated abnormally错误报告

模型所述是一个双反射面天线，主板上面我放置了八个馈源，目的是想通过这个阵列馈源的相位改变控制天线的扫描，用时域求解器仿真all ports，网格自适应加密或者手动局部加密都会出现这个错误，实在不知道为什么，请大家看看 谢谢了。

器件太大，网格太多，空白空间占用了很多网格资源。 
 
尝试用subgridding，给出警告信息： 
Shape "component1:solid2" was internally patched to maintain watertightness 
 
按照帮助文件的说法： 
 
Shape "xxx" was internally patched to maintain watertightness. 
 
It might happen that the surface of a solid body is not completely closed. This might be caused by a CAD model imported from a different vendor. 
 
During the process of matrix generation the surface of the respective solid body is repaired automatically in order to run the hexahedral based solver correctly. The repaired part of the shape is shown in the mesh view of the project. The original CAD model remains unchanged.

错误报告的贴图呢

能说下你机器的配置吗

好像不报错。

！不报错？我自己电脑仿了4次，改了四次都是一个错误。贴图我没留  但是错误这句话我记着了。

可能你时间还没到  得仿一阵子才会报。

一亿网格啊，要仿好久啊。。。

其他不说了  机器内存32G

一个端口 我上次仿了20个小时