HFSS仿真一个喇叭天线的时候遇到的。

Horn (D:/Data/HFSS/)
  HFSSDesign1 (DrivenModal)
    [info] Adaptive solution setup, process hf3d: '1' conductors touch lumped port 'P1', typically a lumped port contains 2 conductors.  Please verify conducting boundaries and objects are correctly assigned and touch the port.  If a Radiation boundary touches the port and it is desired for use during the port solution, select 'Use Radiation Boundary on Ports' under the Advanced tab in the Solution Setup. (8:30:15 下午  十一月 18, 2011)
    [info] Adaptive solution setup, process hf3d: '1' conductors touch lumped port 'P1', typically a lumped port contains 2 conductors.  Please verify conducting boundaries and objects are correctly assigned and touch the port.  If a Radiation boundary touches the port and it is desired for use during the port solution, select 'Use Radiation Boundary on Ports' under the Advanced tab in the Solution Setup. (8:31:50 下午  十一月 18, 2011)

同轴线耦合到矩形波导中，用的是Drivenmodel模式，Lump port端口馈电。。但是提示有这个问题。不是到底什么意思i？

同问。。有没有大神来解答一下啊

这么多年了，还是没人解答啊。。我自己都学会啦。。

也遇到这问题啦，求LZ解答一下吧

楼主怎么解决的，我也遇到同样的问题

这么久了，我给忘记了。。真不知道当初是如何遇到这个问题的了。。