淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up an Optimization Analysis >
Specifying the Min. and Max. Variable Values

Specifying the Min. and Max. Variable Values

For every optimization setup, Optimetrics automatically sets the minimum and maximum values that it will consider for a variable being optimized. Optimetrics sets a variable’s minimum value equal to approximately one-half its starting value. (The starting value is the variable’s current value set for the nominal design.) Optimetrics sets the variable’s maximum value equal to approximately one and one-half the starting value. During optimization analysis, variable values that lie outside of this range are not considered.

Warning

Variable values must be single real numbers, or expressions that evaluate to single real numbers. Complex numbers cannot be used as the values of variables in any optimetric analysis.

The topics for this section include:

Override the default minimum and maximum variable values for a single optimization setup

Change the default minimum and maximum variable values for every optimization setup

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com