淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting up an Optimization Analysis >
       Specifying the Min. and Max. Variable Values >
           Changing the Min. and Max. Variable Values for Every Optimization Setup

Changing the Min. and Max. Variable Values for Every Optimization Setup

1. Make sure that the variable’s minimum and maximum values are not being overridden in any optimization setup.

2. If the variable is a design variable, do the following: On the Product menu, click Design Properties.

If the variable is a project variable, do the following: On the Project menu, click Project Variables.

The Properties dialog box appears.

3. Select Optimization.

4. Type a new value in the Min or Max text box for the value you want to override, and then press Enter.

When Optimetrics solves an optimization setup, it will not consider variable values that lie outside of this range.


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com