淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting up an Optimization Analysis >
       Specifying the Min. and Max. Variable Values >
           Overriding the Min. and Max. Variable Values for a Single Optimization Setup

Overriding the Min. and Max. Variable Values for a Single Optimization Setup

1. In the Setup Optimization dialog box, click the Variables tab.

All of the variables that were selected for optimization analysis are listed.

2. Type a new value in the Min or Max text box for the value you want to override, and then press Enter.

The Override option is now selected. This indicates that the value you entered will be used for this optimization analysis; the variable’s current Min or Max value in the nominal design is ignored.

• Alternatively, you can select the Override option first, and then type a new value in the Min or Max text box.

3. Optionally, click a new unit system in one of the Units text boxes.

To revert to the default minimum and maximum values, clear the Override option.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com