淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Monte Carlo Analysis   


Nexxim Monte Carlo Analysis

The Nexxim DC and transient analyses can be performed multiple times while using randomly generated values of one or more component parameters. The random-value method is referred to as Monte Carlo analysis. For DC, Monte Carlo analysis can be performed with or without specifying a parameter sweep. For details on the syntax used to specify sweeps, see Variable Sweep.

 

A Monte Carlo analysis requires three steps:

1. Define a netlist parameter using one of the Monte Carlo distributions.

2. Use the netlist parameter directly or indirectly as the value of an element parameter or model parameter.

3. Add the Monte Carlo analysis to the DC or TRAN solution setup in the netlist.

Note 

Nexxim Monte Carlo analysis is supported only in netlists. There is no setup dialog in the Designer schematic editor.

 

The topics for this section include:

Running Monte Carlo Analyses

Viewing a Monte Carlo Analysis in a Report

Monte Carlo Analysis Netlist Syntax

Monte Carlo Analysis Options

Monte Carlo Distributions

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com