淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Monte Carlo Analysis >
Running Monte Carlo Analyses

Running Monte Carlo Analyses

If you use the Netlist Editor to create a design, the netlist should contain the information for running the Monte Carlo analysis. No Solution Setup is required.

1. Specify the Monte Carlo analysis as part of simulation statement (.DC or .TRAN), using the syntax described in the section Monte Carlo Analysis Netlist Syntax.

2. Run the simulation:

• On the Circuit menu, click Analyze with Nexxim. If the circuit is set up correctly, the analysis begins immediately and a red progress bar appears.

• The Message Window signals success or failure..

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com