淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Design Examples >
Nexxim RF Design Examples >
Nonlinear Loadpull Amplifier Example >
Loadpull Analysis of NLAMP

Loadpull Analysis of NLAMP

For the loadpull analysis, the resistance and reactance of the load at Port 2 is varied to cover the entire Smith chart.

1. Expand the Analyses icon and double-left-click on Loadpull.

The Loadpull analysis is set to analyze the first seven harmonics of frequency freq1, with added sweeps of ZRho and ZAng, the resistance and reactance variables. Click OK to close the setup dialog.

2. With analysis Loadpull still selected, right-click and select Analyze. The analysis runs to completion.

3. Click on the Results icon and double click on loadpull Smith Contour to see the results:

The loadpull Smith Contour plot shows the output power in dBm over the swept loadings as a Smith Chart contour. The plot shows the Maximum output power generated by the amplifier for a given load impedance.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com