淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Filter Design Tool >
   Filter Design Window >
       Analyzing the Filter >
           Plotting Different Responses

Plotting Different Responses

Each time an analysis is run, all available responses are calculated and kept ready to display. You can choose an individual response or a combination of responses.

To change the response type:

1. Click Analysis Settings on the Filter>Analysis submenu to bring up Analysis Settings dialog box. In the dialog box, select response type from Plot response and click OK.

2. Click Insertion Loss + Return Loss on the Filter>Analysis submenu (shortcut for this option)

3. Click Phase + Group Delay on the Filter>Analysis submenu (shortcut for this option)

4. Click Smith Chart on the Filter>Analysis submenu (shortcut for this option)

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com