• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Filter Design Tool >
   Filter Design Window >
       Making Modifications >
           Simple Element Modifications >
               Combining Elements                   

Combining Elements

You can combine elements to simplify the circuit schematic. Elements may be combined to create:

• One single element - in the case that you combine two elements of the same type and configuration. For example, two series capacitors can combine into one.

• One lumped, distributed or mixed resonator - in the case that you combine two different pieces of a resonator or a resonator with another element. For example, a series inductor and a series capacitor can combine into a series LC-resonator while you can combine a series LC-resonator and a series inductor as well. Sometimes two resonators combine into one, like two series LC-resonators will combine into another LC-resonator.

• One LC- or distributed double-resonator (or quad)- in the case you combine two parallel element resonators connected in series or two shunt element resonators connected in shunt. For example, two shunt LC-resonators will combine into a four-element double-resonator.

To combine elements:

1. Select adjacent elements.

2. Click Combine on the Filter>Element submenu. The most proper combination will then be applied to the selections.

Combining is an exact-equivalent modification. It does not change the response.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com