淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Filter Design Tool >
   Filter Design Window >
       Making Modifications >
           Simple Element Modifications >
               Changing Loss Properties

Changing Loss Properties

You can change the loss properties of a selected element using the Q factors dialog box.

To edit loss properties of an element:

1. Select an element in the schematic.

2. Bring up the dialog box by clicking Quality factors on the Filter>Element submenu. This is the same dialog box which is used in the Properties page of the design wizard.

3. After changing properties, Click OK.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com