Frequency Domain Solver Settings

Before the frequency domain solver can be started, several settings and definitions should be made. These settings are grouped on the ribbons to allow an easy and intuitive access.

Please refer also to the QuickStart Guide which guides you interactively through these steps.

Home: Settings

Units

Modeling: Materials

Background
New / Edit
Material Library

Structure Modeling:

Simulation: Settings

Frequency

Boundaries

Simulation: Sources and Loads

Waveguide Ports

Discrete Ports

Plane Wave

Lumped Elements

Simulation: Monitors

Probes

Field Monitors

If you define a monitor, the S-parameters for this frequency will be automatically calculated, unless the corresponding option in the Frequency Domain Solver Parameters is deactivated. The monitor definition introduces another frequency sample. If you want to store the E- and H-Fields for all calculation frequencies, you may activate the "store all results" checkbox in the Frequency Domain Solver Parameters. To calculate antenna radiation patterns, you must first define a Farfield monitor.
Note: It is also possible to add monitors after an S-Parameter calculation has been performed. See 1D-Plot Overview for further details.

Simulation: Solver

Start Simulation Frequency Domain Solver

Before starting the solver, you may change the frequency sample definitions. Please keep in mind that frequency ranges may not exceed the global frequency range.

Note: Several basic settings can be made in advance by selecting an application specific project template.

After making these settings you may start the solver by pressing the Solver Start Solver button.

Frequency Domain Solver Settings

Before the frequency domain solver can be started, several settings and definitions should be made. These settings are grouped on the ribbons to allow an easy and intuitive access.

Please refer also to the QuickStart Guide which guides you interactively through these steps.

Note: Several basic settings can be made in advance by selecting an application specific project template.

After making these settings you may start the solver by pressing the Solver Start Solver button.

淘宝官方店推荐课程在线工具联系方式关于我们

	CST视频教程推荐 CST微波工作室入门与应用详解 \| CST使用操作基础


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com

Frequency Domain Solver Settings

Before the frequency domain solver can be started, several settings and definitions should be made. These settings are grouped on the ribbons to allow an easy and intuitive access.

Please refer also to the QuickStart Guide which guides you interactively through these steps.

Note: Several basic settings can be made in advance by selecting an application specific project template.

After making these settings you may start the solver by pressing the Solver Start Solver button.

Before the frequency domain solver can be started, several settings and definitions should be made. These settings are grouped on the ribbons to allow an easy and intuitive access.