Mesh View (Tetrahedral)
Mesh Mesh View
In the mesh view, the most recently generated mesh is visualized and
all actions concerning the further mesh creation may be performed. The
automatic mesh generator may be controlled and the resulting mesh is displayed.
This view should always be checked before a simulation is started because
the mesh has a strong influence on the achievable accuracy of the results.
Entering and updating the mesh view
The mesh view may be entered by pressing the
MeshMesh View button ( ). If no tetrahedral mesh has been generated before, or if the
mesh has been deleted, it is necessary to update the mesh. This may be
performed by pressing the update :
Mesh ControlUpdate button ( ).
The main plot window in the mesh view
By default the main plot window shows the surface
mesh of the structure elements.
The volume mesh may be visualized by activating
the Cutting Plane
by pressing the
Sectional ViewCutting Plane button ( ). Note that the Draw solid cutplane field in the options
frame of the cutting
plane dialog must be checked to see the volume mesh.
Visualization of the background material mesh
To display the mesh of the background material,
please activate the background material drawing in the
OptionsView Options dialog.
Navigation tree in the mesh view
The Navigation
Tree changes when entering the mesh view. All post processing folders
disappear. If specific mesh properties are set for a shape, see Local
Mesh Property (Tetrahedral), this is visualized in the mesh view with
the 
icon in the navigation tree.
See also
Cutting
Plane, Mesh
Properties, Special
Mesh Properties
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
