Mesh View (Surface)
Mesh Mesh View
In the mesh view, the most recently generated mesh is visualized and
all actions concerning the further mesh creation may be performed. The
automatic mesh generator may be controlled and the resulting mesh is displayed.
This view should always be checked before a simulation is started because
the mesh has a strong influence on the achievable accuracy of the results.
Entering and updating the mesh view
The mesh view may be entered by pressing the
MeshMesh View button ( ). If no surface mesh has been generated
before, or if the mesh has been deleted, it is necessary to update the
mesh. This may be done by pressing the update :
Mesh ControlUpdate button ( ).
The main plot window in the mesh view
By default the main plot window shows the
surface mesh of the structure elements.
A Cutting
Plane may be activated by pressing the
Sectional ViewCutting Plane button ( ).
Navigation tree in the mesh view
The Navigation
Tree changes when entering the mesh view. All post-processing folders
disappear. If specific mesh properties are set for a shape, see Local
Mesh Property (Surface), this is visualized in the mesh view with
the 
icon in the navigation tree.
See also
Cutting
Plane, Mesh
Properties, Special
Mesh Properties
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
