Name
Specify the unique name for the torus.
Orientation: X/Y/Z (U/V/W)
Specify the orientation of the torus axis along the currently active coordinate system. The axis must always be aligned with one of the coordinate axes. To define a torus axis which is not parallel to one of the coordinate axes you have to specify a local coordinate system for which one of its axes points into the desired direction.
According to the currently active coordinate system only either X/Y/Z (global coordinates) or U/V/W (local coordinates) will be shown in the dialog box.
Large radius
Specify a valid expression for the large radius of the torus (see picture above).
Small radius
Specify a valid expression for the small radius of the torus (see picture above).
Xcenter, Ycenter, Zcenter
Specify valid expressions for the center coordinates of the torus in the global coordinate system. Please note that these entries only appear when the global coordinate system is currently active.
Ucenter, Vcenter, Wcenter
Specify valid expressions for the center coordinates of the torus in the local coordinate system. Please note that these entries only appear when a local coordinate system is currently active.
Segments
Specify a valid integer expression for the segmentation of the torus.
Component
Choose a new component from the select list. You can also create a new component by typing the name of the new component.
Material
Select the material to which this shape will be assigned from the list of previously defined materials or create a new material by selecting [New Material...]. You can also load a material from the material library by selecting [Load from Material Library...].
OK
Press this button to finally create the torus.
Preview
Press this button to create a preview image of the torus. This option is very useful to check the settings before you actually create the shape.
Cancel
Closes this dialog box without performing any further action.
Help
Shows this help text.
See also
Brick, Cylinder, Elliptical cylinder, Cone, Sphere, Analytical Face, Extrude Profile, Extrude Face, Rotate Profile, Rotate Face, Loft, Shell, Coordinate systems, Bond Wire.