Pick Point on Face Mode
Picks Pick Point Pick Point On Face
This mode enables you to select an arbitrary point on a face from your
model. As soon as a point is selected, it will be highlighted by a thick
red dot.
You may select a point by double-clicking at an arbitrary location
on a face. The current location of the mouse pointer will then be projected
on the underlying face. Please note that a point of a face can not be
picked when an other shape than that belonging to the face is currently
selected.
Measure point position and point distances
Whenever one or two points are selected in the
model, its coordinates will be displayed numerically in the .
Additionally, when two points are selected, the numerical coordinate distance
between the two points will also be displayed in the plot window.
Cancel this mode
You may cancel this mode by choosing Leave
Pick Mode ( )
from the
or pressing ESC.
Keep the pick mode
By default, the pick mode will be automatically
exited when a point is selected. This behavior may be tedious when a sequence
of points must be selected. To avoid the need for entering the pick mode
again, you may choose
Picks Picks Keep Pick Mode ( ). The pick mode will then remain active until
you cancel it as described above.
Deselect a picked point
Double-clicking onto an edge whose circle center
has already been selected will deselected the point in question.
Clear all picks
You may clear the selection of all picked points,
edges or areas by choosing
Picks Clear Picks ( ).
List of picked points
You may obtain a list of all selected points
by choosing
Picks Pick Lists Selected
Points ( ).
Hotkeys
Some hotkeys are available to improve the handling
of commonly used pick operations. The corresponding hotkeys are noted
in the menus next to the commands (see Picking
Overview ).
See also
Pick modes: smart
picking, point, edge center point, circle
center point, circle
radius, area center
point, area, edge,
numerical edge definition,
points list,
edges list,
areas list.
![Ansoft Designer 教程](/images/Designer/VNA_AN.png)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|