首页 >> CST教程 >> CST2013在线帮助系统 |
Main Controller SettingsFile: OptionsMain ControllerThis dialog will cover the installation and the setup of the main controller, used for distributed computing and for MPI.Server Name or IP address Enter the address of a running CST Main Controller. IP address is also accepted. Please note, that in case of a node-locked license, the CST Main Controller must run on the same computer as the front-end. Port: Enter the TCP port of the CST Main Controller. Local host information This list is for information purposes only. It displays your local host name and your local IP addresses. Sometimes the computer has more than one network card connected to different sub networks so that more than one IP address is available. OK The settings will be saved. Cancel Closes this dialog box without performing any further action. Help Shows this help text.
Note: The setting for the CST Main Controller is stored on a per user basis. It is possible to define additional main controller per project. See also Distributed Computing Overview , Main Controller per project HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |