Mesh Properties (Tetrahedral)

Simulation: Mesh Global Properties

Note: The active mesh type refer merely to the mesh preview. A change of the solver method will change the active mesh type.

Mesh density control frame

Minimum number of steps: This value controls the global relative mesh size. It specifies the minimum number of mesh edges to be used for the diagonal of the model bounding box. Consequently, the higher this value the finer the mesh.

Together with the possibility to set local mesh sizes, see Local Mesh Property (Tetrahedral), this is the most important quantity to control the automatic tetrahedral mesh generator. Please mind that tetrahedral meshes combined with first order elements need a higher resolution to gain the same accuracy as when higher order elements are used.  (Second order elements are default in all CST EM STUDIO solvers.)

Material based refinement

With this option the material-based refinement can be switched on or off.

Mesh summary frame

The values shown in this frame are only for information purposes. You can not edit them.

Min. edge length: The length of the shortest mesh edge.

Max. edge length: The length of the longest mesh edge.

Tetrahedrons: The number of mesh cells.

Min. quality: The minimum of all mesh cell quality values.

Max. quality: The maximum of all mesh cell quality values.

Average quality: The average of all mesh cell quality values.

Note:

The quality of a tetrahedron measures how good its shape matches the shape of an ideal, equilateral tetrahedron. It is defined by the expression

,

where rin is the inradius of the tetrahedron and rcirc the circumradius. The factor 3 is a scaling factor, such that the quality is positive and less or equal to one. Low quality values indicate degenerated mesh cells, which may have a negative impact on the convergence.

OK

Accepts the changes and closes the dialog. If changes were made, the mesh will be updated.

Apply

Stores the current settings. The dialog box open remains open.

Cancel

Closes this dialog box without performing any further action.

Update

Updates the mesh representation.

Specials...

Leads to a special dialog box that allows you control the automatic mesh generator.

Simplify model...

Use this button  to globally reduce the complexity of your model.

Help

Shows this help text.

See also

Mesh View (Tetrahedral), Special Mesh Properties