淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Setting Up an EM Design Project

Setting Up an EM Design Project

To set up an EM Design project, follow this general procedure:

1. Insert an EM design.

2. Create the metal and dielectric layers of the design.

3. Assign a thickness, roughness, elevation, and material to each layer.

4. Draw the geometry of the metal layers.

5. If applicable, create a cavity between two infinite ground planes.

6. Define the ports or incident waves in the model.

7. If applicable, insert an external device, an N-port, with known S-parameters into your planar design.

8. Specify how Designer will compute the solution by adding a solution setup.

9. Begin the analysis. Designer will compute the current inside the structure.

10. After computing a solution, view information about the solution and analyze it.

Note

Some of these tasks may not be applicable to your designs. Not all designs require cavities or N-ports.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程

　


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com