Specifying a Solution Quantity for an Output Parameter — Ansoft Designer 7.0 在线帮助文档，Ansys Designer 教程

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

Specifying a Solution Quantity for an Output Parameter

When setting up an output parameter, you must identify the solution quantity on which to base the output parameter. Solution quantities are specified by mathematical expressions that are composed of basic quantities, such as S-parameters; and output variables.

1. Add a row to the output parameters table: Under the Calculations tab of the Setup Sensitivity Analysis dialog box, click Add.

A new row is added to the Output Parameters table.

2. In the Solution text box, click the solution from which the solution quantity will be extracted.

3. In the Calculation text box, specify the solution quantity in one of the following ways:

• If you know the syntax of the mathematical expression or the output variable’s name, type it in the Calculation text box.

• If you want to create an output variable that represents the solution quantity, do the following:

a. Click Edit Calculation.

The Output Variables dialog box appears.

b. Add the expression you want to evaluate, and then click Done.

Designer enters the most recently created output variable in the Calculation text box.

c. To specify a different defined output variable, click the Calculation text box. It becomes a pull-down list that displays all of the defined output variables. Click a new output variable in the pull-down list.

Note

The solution quantity you specify must be able to be evaluated to a single, real number.


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com