Rotating the Phase of N-Port Data

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
Inserting N-Port Data >
Rotating the Phase of N-Port Data

You can rotate the phase of an N-port’s S-parameter data. This is done under the Network Data tab in the N-Port Data dialog box.

1. Click the Network Data tab in the N-Port Data dialog box.

2. Click Phase Rotation.

3. If you select Specify Distance and Effective Dielectric Constant, enter a distance in the Length text box and a dielectric constant value in the Keff text box.

4. If you select Time Delay, enter the delay time in the Time text box and select a unit in seconds from the list.

5. Click Update.

6. Click OK.

Phase rotation is calculated for the N-port data and you return to the Network Data tab.


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com

Rotating the Phase of N-Port Data

Related Topics