• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Inserting N-Port Data >
       Manually Entering N-Port Data           

Manually Entering N-Port Data

You have the option to manually enter S-, Y-, or Z-matrix data in the N-Port Data dialog box, rather than importing or linking to an existing N-port data file.

1. On the Project menu, point to Add Model and click Add NPort Model.

The N-Port Data dialog box appears.

2. Under the N-Port Data tab, select Enter data in spreadsheet.

3. Click the Network Data tab and select whether the information being entered is in the Time or Frequency domain from the Domain list. The Planar EM tool in Designer can interpret only frequency-domain data.

4. Select the units for the information being entered from the Units list.

• Select S-matrix, Y-matrix, or Z-matrix, depending upon the type of data you want to enter.

5. Enter the number of ports to which the N-port is connected in the Ports box.

6. Select the format in which you want to enter the data - (magnitude, phase), (real, imaginary), or (dB/, phase) - from the list. Then enter the data for each frequency point in the spreadsheet.

• Click Add Frequency to add information for an additional frequency point.

• Click Clone to create a copy of the selected set of frequency data and place the copy at the end of the spreadsheet. Cloning can save data entry time.

• Click Delete to delete the selected set of frequency data.

7. Follow the general procedure for inserting N-Port data.

Related Topics

Guidelines for Inserting N-Ports

Working with Imported S-Parameter Data

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com