淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Inserting N-Port Data >
       Drawing a Connection            


Drawing a Connection

After inserting an N-port into your project, you must connect it to your model. A new port is created upon connection, and is automatically defined as a pad port.

The order in which you connect the ports affects the solution. The order in which you select the ports determines the order of port connection. It is very important to connect the ports in the right order, since most active device S-parameters are not symmetrical.

To draw a connection from an N-port to your model:

1. Select the edge of the model to which you want to connect the N-port.

2. Select the port on the N-port that you want to connect to the edge.

3. On the Draw menu, click Connection.

The edge you selected is connected to the N-port and Designer creates a new internal port upon connection. The N-port data will be used during the solution process.

Make sure to connect all the ports of an N-port to the model.

 

.

Note

To remove a connection so that objects can be easily removed and/or reinserted elsewhere, select one or more objects and click Disconnect from Net from the Draw menu.

 

Related Topics

Working with Imported S-Parameter Data



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com