HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例
|
HFSS视频教程推荐： HFSS培训教程套装 | 两周学会HFSS | HFSS微波器件仿真分析实例 | HFSS雷达散射截面分析 HFSS天线设计 | PCB天线设计和HFSS仿真分析实例 | HFSS-IE仿真器使用详解和天线设计实例 |
HFSS online help > Viewing Analysis Results for Optimetrics Solutions
To view actual output parameter values versus design point in data table format:
1. In the project tree, right-click the sensitivity setup for which you want to view the parameter results, and then click View Analysis Result on the shortcut menu.
The Post Analysis Display dialog box appears.
2. Under the Result tab, select Table as the view type, if it is not already selected.
The following values are listed in table format:
• The regression value of the output parameter at the design point is listed in the Func. Value column.
• The first derivative of the regression is listed in the 1st D column.
• The second derivative of the regression is listed in the 2nd D column.
3. Click Apply.
HFSS now points to the selected design variation as the nominal solution and as a result, the design displayed in the Modeler window is changed to represent the selected design variation.
Click Revert to return the design in the view window to the original value.
Plotting Output Parameter Results for a Sensitivity Analysis
Viewing Solution Data for an Optimetrics Design Variation
|
||
Ansys HFSS，Ansoft HFSS online help，Version 15.0. |
HFSS视频教程 | HFSS教程专栏 | 射频工程师培训培训课程 : Viewing Output Parameter Results for a Sensitivity Analysis'>HFSSComments |