HFSS中文教程 HFSS视频教程推荐: HFSS培训教程套装  |  两周学会HFSS  |  HFSS微波器件仿真分析实例  |  HFSS雷达散射截面分析 

HFSS天线设计  |  PCB天线设计和HFSS仿真分析实例  | HFSS-IE仿真器使用详解和天线设计实例

 HFSS online help > Viewing Analysis Results for Optimetrics Solutions >
   Viewing Output Parameter Results for a Sensitivity Analysis       

Plotting Output Parameter Results for a Sensitivity Analysis

To plot output parameter results versus sensitivity variable values on a rectangular (xy) plot:

1. In the project tree, right-click the sensitivity setup for which you want to view the output parameter results, and then click View Analysis Result on the shortcut menu.

The Post Analysis Display dialog box appears.

2. Under the Result tab, select Plot as the view type.

3. Select the sensitivity variable with the sweep values you want to plot on the x-axis from the X pull-down list.

4. Select the output parameter results you want to plot on the y-axis from the Y pull-down list.

The xy plot appears in the Post Analysis Display dialog box.

The plot displays actual output parameter results for each solved design variation. It also displays a parabola that best fits these results. The parabola is a more accurate representation of sensitivity around the design point than any individual solved design variation.



HFSS教程     

Ansys HFSS,Ansoft HFSS online help,Version 15.0.

HFSS视频教程HFSS教程专栏射频工程师培训培训课程 : Plotting Output Parameter Results for a Sensitivity Analysis'>HFSSComments