淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Schematic Editor >
   Designer I/O Wizard       


Designer I/O Wizard

The Designer I/O Wizard provides an easy interface to set up drivers and receivers for a single schematic or for a group of schematic components. The drivers and receivers the I/O Wizard uses are IBIS models that have been previously imported to the models folder of a project. (If you have not already loaded the IBIS models, you are given the option to do so by the I/O Wizard.) To import IBIS models, select Tools > Import IBIS Components.

The I/O Wizard inspects the current schematic, indicating all unconnected pins, and allows you to create components for the desired connectivity configuration. Connectivity options include:

• Fully configured IBIS drivers and receivers

• Power and Ground pins

• Probes and designated points of circuit stimulation, such as Pseudo Random Bit Sources

After you set the initial configuration, the I/O Wizard can be rerun and any newly added or unconnected pins will be indicated, allowing you to further modify the design.

 

The topics for this section include:

I/O Wizard Dialog

Signal Setup

Power/Ground Pin Setup

Source/Analysis Setup




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com