淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Working with Designer Projects >
   Setting Options via Configuration Files >
       Example Uses for Export Options Features >
           Example for Reverting from a User Defined Option Value to the Administrator Default               


Example for Reverting from a User Defined Option Value to the Administrator Default

Consider the case in which Designer 14.0 was installed and the administrator initially did not set a value for the Desktop/Settings/ProjectOptions/DiskLimitForAbort setting in the default installation config file. User jsmith (who always uses host jshost) wanted to be warned before disk space dropped to zero, so he set the Desktop/Settings/ProjectOptions/DiskLimitForAbort to 100 MB using the UI. This setting is recorded in the host dependent user options config file for host jshost and user jsmith. Now the administrator learns that many users are running into disk space issues, so that administrator sets the installation default value for the setting Desktop/Settings/ProjectOptions/DiskLimitForAbort to 1000 MB, as in the above example.

When user jsmith runs Designer 14.0 on host jshost, the disk limit is 100 MB, not 1000 MB, because the host dependent user options config file overrides all of the other config files. User jsmith may revert to the administrator provided default by removing this setting from the host dependent user options config file for host jshost and user jsmith. The following command may be run by user jsmith on host jshost to remove this setting:

UpdateRegistry -Delete -ProductName Designer14.0 _
-RegistryKey Desktop/Settings/ProjectOptions/DiskLimitForAbort_ -RegistryLevel user_machine

If user jsmith had added a value for this setting to the host independent user options config file, then user jsmith would also run the following command to remove this setting from the host independent user options config file:

UpdateRegistry -Delete -ProductName Designer14.0 _
-RegistryKey Desktop/Settings/ProjectOptions/DiskLimitForAbort
-RegistryLevel user

Related Topics

Setting Options via Configuration Files

Setting or Removing Option Values in Configuration Files: UpdateRegistry Command

User Options and the Update Registry Tool

Batchoptions Command Line Examples

 




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com