 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
|
Optimetrics > Adding a Variable Sweep DefinitionA parametric setup is made up of one or more variable sweep definitions. A variable sweep definition is a set of variable values within a range that Optimetrics drives Designer to solve when the parametric setup is analyzed. You can add one or more sweep definitions to a parametric setup. 1. On the Product menu, point to Optimetrics Analysis, and then click Add Parametric • Alternatively, right-click Optimetrics in the project tree, and then click Add>Parametric on the shortcut menu. The Setup Sweep Analysis dialog box appears. 2. Under the Sweep Definitions tab, click Add. The Add/Edit Sweep dialog box appears. All of the independent variables associated with the design are listed in the Variable pull-down list. 3. Click the variable for which you are defining the sweep definition in the Variable pull-down list. If you do not define a sweep definition for a variable in the list, the variable’s current value in the nominal design will be used in the parametric analysis. 4. Specify the variable values to be included in the sweep. 5. Click Add, and then click OK. You return to the Setup Sweep Analysis dialog box. The variable sweep is listed in the top half of the window. View the design variations that will be solved in table format under the Table tab. Viewing the sweep definition in table format enables you to visualize the design variations that will be solved and manually adjust sweep points if necessary.
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
|
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com |
|
Ansoft Designer / Ansys Designer 在线帮助文档：
