淘宝官方店 推荐课程 在线工具 联系方式 关于我们 | |
微波射频仿真设计 Ansoft Designer 中文培训教程 | HFSS视频培训教程套装 |
|
首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
Nexxim Simulator > Open Stub, Physical Length
Netlist FormAn instance of an open stub with physical length has the following netlist syntax: Axxx n1 W=val P=val COMPONENT=open_stub SUBSTRATE=substrate_name n1 is the name of the node attached to the open stub. The entry COMPONENT=open_stub identifies the element as an open stub with physical length. The entry SUBSTRATE=substrate_name identifies the microstrip substrate model name selected for the design (see Selecting a Microstrip Substrate). See the Microstrip (MS) Substrate for information on this substrate type.
Netlist ExampleA44 Port1 W=0.001 P=10e-3 COMPONENT=open_stub SUBSTRATE=FR4 where FR4, the selected layout technology or substrate type, has a definition such as: .SUB FR4 MS( H=7.6200e-004 Er=4.4 TAND=0.02 TANM=0 Notes1. [All substrates] The physical model using physical length includes the open end length correction. 2. [All substrates] The open stub model is equivalent to a transmission line model followed by an open model. This is also true in the case of negative length specifications, which are used for deembedding purposes. Note that in the latter case, the open stub model is equivalent to the transmission line model with a negative length terminated by an open. 3. [Microstrip] This model includes radiation effects if a cover height is not supplied (i.e., open structure.) 4. [Microstrip] The following limits apply: .01 £ W/H £ 100, where H is the thickness of the dielectric HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |