淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Oscillator Analysis >
   Oscillator Analysis Technical Notes >
       Controlling Nexxim Oscillator Analysis >
           Setting Tolerances for Oscillator Analysis               


Setting Tolerances for Oscillator Analysis

Two options are provided to control the tolerances for oscillator analysis.

.osc.reltol is the standard relative voltage tolerance used in Newton-Raphson. Specifying osc.reltol allows the user to tighten or loosen the voltage tolerance for accuracy vs. convergence, as applied just to oscillator analysis. The default is 1e-4.

osc.freq_abstol is the relative frequency tolerance to be applied to the resonant frequency calculation. The default is 10.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com