淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
VerifEye and QuickEye Analyses >
Running QuickEye Analysis from the Schematic Editor >
Run the QuickEye Analysis and Display Results

Run the QuickEye Analysis and Display Results

1. Run the simulation:

• On the Circuit menu, click Analyze. If the circuit is set up correctly, the analysis begins immediately and a red progress bar appears.

• If the analysis is not successful, check the Message Window for an explanation, and then take corrective action.

2. Display results:

• On the menu bar, click Circuit and then click Results>Create Standard Report. (Alternatively, select Create Standard Report from the Results icon in the Project Manager window.)

• For more information, see QuickEye Analysis Outputs. For information on reporting the Peak Distortion Analysis (PDA) data, see Peak Distortion Analysis.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com