淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Linear Network Analysis >
LNA Circuit Configuration

LNA Circuit Configuration

To configure the circuit for linear network analysis, you must add test ports to the circuit. The procedure depends on the type of design—circuit or netlist.

LNA Circuit Schematic Configuration

LNA Circuit Netlist Configuration

Note

A port or port impedance resistor is not required for a linear network analysis that consists only of noise calculations.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com