• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Command Line Controls >
   Invoking the Nexxim Simulator       

Invoking the Nexxim Simulator

To run the Nexxim simulator, type in the following command line at the prompt:

nexxim [–o output_file] [options] input_file

The input netlist file contains the circuit description, simulator controls, and options.

Valid formats and filename extensions for the input netlist file are:

•  .cir—Nexxim internal netlist format

•  .sp—HSPICE netlist format

•  .scs—Spectre® netlist format.

See Netlist Format for a description of the Nexxim internal netlist syntax.

The –o output_file entry outputs the quantities specified by the .PRINT statements in the input netlist_file to a file called output_file.sdf, located by default in the simulator directory. To output the file under a different directory, include the directory pathname with the filename. If the –o entry is omitted, the simulation results are output to a file called input_file.sdf in the directory containing the netlist file. The output file is written in the Ansoft Nexxim SDF (Simulation Data File) format. See Viewing Results for information on viewing SDF-format files in Designer.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com