淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Command Line Controls >
Viewing Results in Designer

Viewing Results in Designer

The result of a Nexxim simulation is written out to a file in Simulation Data File (SDF) format, an Ansoft-proprietary binary format. To view the results of a simulation that has been run from the command line, start Designer.

1. On the File menu, select Open. The Open dialog box appears.

2. In the Look in field, browse to the directory containing the SDF file you want to display.

3. In the Files of type pulldown, select either Ansoft Nexxim Solution (*.sdf) or All Ansoft Nexxim Files (*.adsn, *.cir, *.sdf, *.sp).

4. Select the SDF file you want to display, then click Open.

5. A Project icon appears in the Projects window of Designer. Click on the + sign for the project, then on the + sign for the circuit. A Results icon appears. Right-click on the Results icon, and select one of the Report types.

6. The Report dialog box opens. Select the Y-data from the panel on the right, then click New Report.

7. The graphic display of that trace appears.

8. Repeat steps 5 through 8 as often as desired to display all the simulation data in the results file.

9. On the File menu, click Save as, then save your settings as a Designer .adsn file.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com